Booster Plus - SDS Plus

The Booster Plus has three cutting edges. The 120° cutter angle guarantees perfect concentric holes, giving greater pull-out values for your anchor. Three cutting edges means no "snagging" of the bit on the rebar. The Booster Plus can then drill straight through the reinforcing.
The combination of a high pressure channel with a low pressure chamber enables the square flute to provide very efficient dust removal combined with reduced vibration.

Features

3 Cutting edges.

Square section flute.

Suitable for use in reinforced concrete.

PGM approved and marked.

Made in Europe.

Product Code	Drill Diameter (mm)	Working Length (mm)	Total Length (mm)	Selling Unit
B6160	6.0	100	160	Each
B6210	6.0	150	210	Each
B6260	6.0	200	260	Each
B65160	6.5	100	160	Each
B65210	6.5	150	210	Each
B65260	6.5	200	260	Each
B7160	7.0	100	160	Each
B7210	7.0	150	210	Each
B8160	8.0	100	160	Each
B8210	8.0	150	210	Each
B8260	8.0	200	260	Each
B8460	8.0	400	460	Each
B10160	10.0	100	160	Each
B10210	10.0	150	210	Each
B10260	10.0	200	260	Each
B10310	10.0	250	310	Each
B10460	10.0	400	460	Each
B12160	12.0	100	160	Each
B12210	12.0	150	210	Each
B12260	12.0	200	260	Each
B12310	12.0	250	310	Each
B12460	12.0	400	460	Each
B14160	14.0	100	160	Each
B14210	14.0	150	210	Each
B14260	14.0	200	260	Each
B14460	14.0	400	460	Each
B16210	16.0	150	210	Each
B16310	16.0	250	310	Each
B16460	16.0	400	460	Each
B18210	18.0	150	210	Each
B18310	18.0	250	310	Each
B18460	18.0	400	460	Each
B20210	20.0	150	210	Each
B20310	20.0	250	310	Each
B20460	20.0	400	460	Each